FTP Cat.6 Keystone Jack 180 Degree: This FTP Cat.6 180 degree tooless keystone jack is widely used in houses, companies, teaching facilities and other structured cabling systems. It is made of high quality material and with good performance, which makes it have UL/RoHS/CE certificates.
1.FTP Cat.6 Keystone Jack 180 Degree Introduction
This FTP Cat.6 180 degree tooless keystone jack is used to connect equipment room with working area, to achieve signal transmission. It is RJ45 8P8C jack, suitable for 22-24AWG stranded and solid wire. Sticked with universal color code labels on the IDC cap, you may put the wires into this IDC cap, and press the cap onto IDC, then the termination is done. It’s quite convenient and fast.
2.FTP Cat.6 Keystone Jack 180 Degree Parameter (Specification)
Below are the electrical and mechanical datas of this FTP Cat.6 180 degree tooless keystone jack:
|Voltage Rating||125 VAC RMS|
|Current Rating||1.5 AMP|
|Contact Resistance||20 Milliohms Max|
|Insulation Resistance||100 Megohms min @ 500 VDC|
|Dielectric Strength||750 VAC RMS 60Hz, 1Min|
|C6 Permanent Link||Conform to ANSI/TIA/EIA-568B.2-1|
|TIA Cat.6 Perm. Link Test||Worst pair NEXT margin≥5.0 DB|
|Retentiveness of insertion structure||50N 60±5s|
3.FTP Cat.6 Keystone Jack 180 Degree Feature And Application
This FTP Cat.6 180 degree tooless keystone jack is 180 degree design, and each keystone jack goes with a dust cover for IDC, which is also a termination tool, which makes this keystone jack tooless. The dust cover also helps to protect the keystone jack from damaged and keep the dust away.
This keystone jack can be used with faceplate and back box, as a combination, used in structured cabling system.
4.FTP Cat.6 Keystone Jack 180 Degree Details
Material and other mechanical datas of this FTP Cat.6 180 degree tooless keystone jack:
|Housing Material||Zinc Alloy|
|PCB Material||FR-4 T=1.2mm|
|Contact Material||Phosphor Bronze Stamp Pin T=0.35mm|
|IDC Contact Material||Phosphor Bronze, T=0.5mm with Tin Plated|
|RJ45 Jack Life||750 Times min|
|IDC Life||200 Times min|
5.FTP Cat.6 Keystone Jack 180 Degree Qualification
This FTP Cat.6 180 degree
tooless keystone jack complies with ANSI/TIA/EIA-568-C.2 standard. This keystone jack is made of high quality material and with good performance, which makes it have UL/RoHS/CE certificates
6.Deliver,Shipping And Serving
FTP Cat.6 180 degree tooless keystone jacks will all be well packed before delivery. Cartons can be palletized if required.
We also provide free service to design customized packets.
It’s quite convenient to deliver the goods from our factory to Ningbo port and Shanghai port.
Start with quotation, sample preparation, answering queries about specifications, and even complaint if it happens, you can always get prompt response.
For this FTP Cat.6 180 degree tooless keystone jack, we provide Surlink brand products, and also take OEM orders.
We have our own factory, which guarantees the most competitive prices of the products.
There is R&D department, which insures the performance of each product and the improvements, and QC department to control the quality of incoming raw material and the quality of final products.