Loose Tube Metallictype LAP Sheath: This stranded loose tube non-armored fiber cable is widely used in data centers, office parks and modern buildings, for high speed network application.
1.Loose Tube Metallictype LAP Sheath Introduction
Below are some technical specifications of this stranded loose tube non-armored fiber cable for 30 fibers:
|Max number of fibers per tube||6|
|Steel wire/strand diameter(mm)||1.6|
|Nominal Cable Diameter(mm)||10.6|
|Nominal Cable Weight(kg/km)||108|
|During Installation||20 Times Cable Diameter|
|After Installation||10 Times Cable Diameter|
3.Loose Tube Metallictype LAP Sheath Feature And Application
This stranded loose tube non-armored fiber cable is usable in duct or aerial, in long-haul communication systems, junction communication systems, subscriber network systems and local area network system.
4.Loose Tube Metallictype LAP Sheath Details
This stranded loose tube non-armored fiber cable is protected by a black PE oversheath, suitable for duct or aerial application.
5.Loose Tube Metallictype LAP Sheath Qualification
This stranded loose tube non-armored fiber cable complies with ANSI/TIA/EIA-568-C.2 standard. This keystone jack is made of high quality material and with good performance, which makes it have multiple certificates
6.Deliver,Shipping And Serving
This stranded loose tube non-armored fiber cable will all be well packed before delivery. Cartons can be palletized if required.
We also provide free service to design customized packets.
It’s quite convenient to deliver the goods from our factory to Ningbo port and Shanghai port.
Start with quotation, sample preparation, answering queries about specifications, and even complaint if it happens, you can always get prompt response.
For this stranded loose tube non-armored fiber cable, we provide Surlink brand products, and also take OEM orders.
We have our own factory, which guarantees the most competitive prices of the products.
There is R&D department, which insures the performance of each product and the improvements, and QC department to control the quality of incoming raw material and the quality of final products.